TE100-DX8Eplus is an 8-port palm-size dual speed hub that presents a quickest way to build
or expand a Fast Ethernet network. Each port automatically detects and negotiates 10Mbps
and 100Mbps connections. With built-in switch, it allows communica-tion between network
end nodes operating at different speeds. These hubs support one switch port that allows
your hub to be uplinked together without considering the uplink rule of 10Mbps and 100Mbps
hubs. An uplink port extends the distance to 100 meters with 10Mbps or 100Mbps hub stacks.
TRENDnet's TE100-DX8Eplus is perfect for small workgroups to expand as their networking
- Compatible with IEEE 802.3 10Base-T
Ethernet IEEE 802.3µ Fast Ethernet standards
- 8 10/100Mbps auto-negotiation ports
- Fast Ethernet supports both shielded
twisted pair and CAT 5 unshielded twisted pair cables
- MID-II uplink port for easy expansion
- Built-in switch function
intercommunicates between 10Mbps and 100Mbps segments
- Plug and Play with auto-configuration
- One switch port supports 100Mbps
uplink distance up to 100 meters
- External power adapter included
- Uplink jack for easy linking of two
hubs to further expands the network
- Lifetime warranty
IEEE 802.3 10Base-T Ethernet, IEEE 802.3µ 100Base-TX Fast Ethernet standards
- Data Transfer
Media: UTP CAT 5 (100 m), EIA/TIA-568 100-ohm screened twisted pair (STP) (100 m)
Consumption: 12 Watts max. AC external power adapter
- System: Power,
10M Collision, 100M Collision, EXP-FDX
- Port: 10M
Link/Act, 100M Link/Act
171 x 98 x 29 mm (6.73 x 3.86 x 1.14 inches)
453 g (1 lb.)
Temp.: -10° to 40° C (14° to 104° F)
Temp.: -20 to 70° C (-4° to 158° F)
Humidity: 10 % to 90 % non-condensing
Humidity: 5 % to 90 % non-condensing
FCC, CE, VCCI
||Full 100Mbps connectivity
significantly boosts network performance.
||Uplink to another 100Mbps hubs
up to 100 meters away by using the switched uplink port and UTP/STP CAT 5 cable.
||Seamless integration of 10Base-T
and 100Base-TX networks.
||Provides 10Mbps, 100Mbps hub and
10/100 switching functionality in one unit.
||Ethernet workgroups can be
upgraded to Fast Ethernet without changing hubs.